Tower Gang:
I'm going to be guying my 40 foot Rohn 25G tower with a single set of 3/16
EHS guys. I have limited real estate in which to do this.
The tower was free-standing but last year's hurricanes convinced me I need
to change that. It's currently guyed with ropes I installed as an emergency
fix after the first hurricane blew through. They held the tower nicely for
the next two that blew through.
I'm thinking of removing the current pointy top section and replacing it
with a regular section. At the top will be a rotor plate and thrust bearing.
Once guyed, the tower will support a 3 element SteppIR beam and a VHF/UHF
17.5 foot omni vertical.
Question 1: At what point on the tower should I install the guys?? I'm
thinking 35 feet.
Rohn's engineering drawings show guys installed at the top and some
distance down. I only want to install one set of guys...at least at first.
Question 2: How far should guys be from the typical 3 element yagi to
minimize interaction? Do I need to split up the guys with insulators???
My guys will be about 43 feet long. The top of the guys will be about 10
feet from the yagi antenna.
Question 3: Is there some sort of "rule of thumb" for the distance from
the top of the guys to the antenna before the guys need to be broken with
insulators???
Thanks!
73,
Frank N. Haas KB4T
Florida
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|