Towertalk
[Top] [All Lists]

Re: [TowerTalk] FW: 135 degrees phasing.

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] FW: 135 degrees phasing.
From: "Jose M. Valdes R. YV5LIX" <yv5lix@cantv.net>
Date: Fri, 21 Oct 2005 10:46:26 -0000
List-post: <mailto:towertalk@contesting.com>
Hello Jerry,

Yes, I'm using electrical length for my calculations.

73 Jose, YV5LIX. 

-----Original Message-----
From: Jerry Muller [mailto:k0tv@arrl.net] 
Sent: Thursday, October 20, 2005 16:28
To: Rex Lint; yv5lix@yv5lix.org.ve; towertalk@contesting.com
Subject: Re: [TowerTalk] FW: 135 degrees phasing.

Exactly Rex. It gets interesting if he's cutting the cables for electrical
length instead of by physical length. If he's doing electrical length by
looking for a point where they're (n+1)/4 wavelengths long, he can just
change the frequency that he uses to find the null. I usually do mine by
electrical length. It takes out the slight differences.

73, Jerry K0TV

----- Original Message -----
From: "Rex Lint" <rex@lint.mv.com>
To: <yv5lix@yv5lix.org.ve>; <towertalk@contesting.com>
Sent: Thursday, October 20, 2005 9:06 AM
Subject: Re: [TowerTalk] FW: 135 degrees phasing.


> Joe,
>
> Why wouldn't you just add half of a 1/4 wave to a 1/4 wave?  90 degrees 
> plus
> 43 degrees - 135 degrees.
>
> Rex - K1HI
> Merrimack
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of Jose M. Valdes R.
> YV5LIX
> Sent: Tuesday, October 18, 2005 8:51 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] FW: 135 degrees phasing.
>
> Hello,
>
> I'm getting ready for the next CQWW SSB contest and I'm working in phasing

> 2
> 1/4 wave verticals for 75 meters and all simulations shows that best gain 
> is
> obtained with 135 degrees phasing, but I would like to know how to obtain
> 135 degrees phasing with the length of the phasing lines; 90 degrees is 
> easy
> because it uses 1/4 wave electrical length for the phasing lines, which 
> can
> be calculated using the velocity factor of the lines used, but 135 is not 
> as
> easy.
>
> I can obtain 90 degrees phasing using two 1/4 wave RG-11 and one 1/4 wave
> RG-8 for the phasing that will be switched using 2 relays, but 135 degrees
> is another story.
>
> 73/DX Jose M. Valdes R. (Joe) YV5LIX
> eQSL.cc Advisory Board Member
> QSL manager EA7FTR
> SYSOP YV5LIX DX Cluster
> telnet://yv5lix.org.ve:7300
> VHF Packed: 145.430 YV5LIX
> http://www.yv5lix.org.ve
>
>
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any
> questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>