Towertalk
[Top] [All Lists]

[TowerTalk] HELP...IC746PRO

To: "tower" <towertalk@contesting.com>
Subject: [TowerTalk] HELP...IC746PRO
From: "StellarCAT" <RXDesign@ssvecnet.com>
Date: Thu, 24 Nov 2005 08:57:11 -0700
List-post: <mailto:towertalk@contesting.com>
I know this is slightly off topic - but only slightly... I am, was using an 
Autek RF1 meter to
determine my swr on a new F12 240N but the lengths are considerably
shorter than the manual (and everyone else) says... and it is not working
right... so Tom suspects the RF1 as the culprit... however I have no means
of using my IC746PRO to test it as it will not transmit below the ham 
bands -
is anyone aware of a fix to do this? I know for example on the TS940 all one
had to do was to clip a diode.... is there a way to get out of band transmit 
for these rigs for testing antennas at 5W?

g.

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>