Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn-Loc Climbing Safety

To: "W7HPW" <W7HPW@airwired.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Rohn-Loc Climbing Safety
From: ersmar@comcast.net
Date: Sun, 18 Dec 2005 07:43:19 +0000
List-post: <mailto:towertalk@contesting.com>
Mark et al:

     I like the 100% tie-off shock-absorbing lanyard:  
http://store.pksafety.net/fi10tirela.html .  Apparently they don't stretch the 
way Mark's lanyards do while moving around on the tower, but they are a bit 
less costly.  Not clear, though, just how long the unextended legs are.  

73 de
Gene Smar  AD3F


 -------------- Original message ----------------------
From: "W7HPW" <W7HPW@airwired.net>
> I couldn't agree more. 
>       The most recent data from the National Institute for Occupational
> Safety and Health (NIOSH) estimated that the fatality rate for tower
> erectors - one of the smallest sectors of the construction industry -
> averages about 460 deaths per 100,000 employees.
> 
> http://mrtmag.com/mag/radio_falling_assets/index.html
> 
> Compared to other dangerous jobs, Tower work is the most dangerous job in
> the world.
> 
>       I climb commercially and never take shortcuts, know and plan your
> work, better yet take a safety course. Invest in the best equipment; keep it
> in perfect condition.... You get the picture.
> 
>       This is what I use,
> 
> http://store.pksafety.net/toclha.html
> http://store.pksafety.net/shwa10tila.html
> 
> I didn't purchase them here, but are available from several distributors.   
>       
>          
> 
> Mark 
> W7HPW
> 
> Real Radios Glow in Dark
> 
> 
> 
> 
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of Jason Creager
> Sent: Saturday, December 17, 2005 4:57 PM
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] Rohn-Loc Climbing Safety
> 
> On 12/17/2005 at 5:18 PM Doug Rehman wrote:
> 
> >As a side note, make sure you have a safety harness with a chest
> attachment
> >point. The cable grip should attach to your chest attachment point with a
> >locking carabineer; 
> 
> That's not really a sidenote, that's a *life or death* point about
> harnesses in general.
> 
> Use a REAL harness and not a "belt".
> 
> Never, never use a "climbing belt" as your fall protection when climbing a
> tower. That's a good way to end up dead for many reasons (no rescue points,
> putting thousands of pounds of force on your pelvis, etc.).
> 
> Do it right OR DON'T DO IT!
> - Jason - KC0ERG
> ========================================================
> http://jason.creager.com              kc0erg@qsl.net          Las Vegas,
> NV
> All responses subject to the terms of
> http://jason.creager.com/disclaimer.html
> http://jason.creager.com/uros.html - The #1 Mali Uromastyx Info Source
> 
> 
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
> questions and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> 
> 
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather 
> Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
> and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>