I saw a cable guy searching for underground conduit by using a T handle made
from hardened steel. Of course, this only works in regular, damp earth.
73, Keith NM5G
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Barkey, Patrick M.
Sent: Wednesday, February 08, 2006 10:55 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Locating Buried Feedline
I'm getting ready to trench in a cable line to a new tower, and before I do,
I'd like to mark where the existing cables are buried, particularly near the
shack where they all come together.
Any ideas what the most reliable/cheapest way to do this is?
Obviously, I will be digging by hand when I get in the "crossfire"
of existing cables, but I know that you can do a lot of damage with an
errant spade in just one swing.
Thanks.
- Pat
N9RV
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|