Yes Steve, the manufacturer sold a guy set for it. My 1982 catalog shows
the base as 24"x24"x18" and it also shows an HG-MT2-20 guying kit for this
tower. So go ahead Chuck. Do what the manufacturer says. This tower is NOT
a freestanding tower, but was referred to as a "side-supported" tower and
it was designed to be bracketed to a roof or guyed.
At 10:24 AM 2/20/2006, K7LXC@aol.com wrote:
>
>In a message dated 2/20/2006 5:03:43 A.M. Pacific Standard Time,
>towertalk-request@contesting.com writes:
>
> > I'd actually prefer a small set of guys, the first section is only 20
> feet
>high so they would not be particularly large or difficult to place.
>
>
>Hiya, Chuck --
>
> Why would you guy it since the manufacturer doesn't say to and any
>failure will be in the upper 1/3 or so of the tower - not the guyed base
>section?
>
> The guys are pretty superfluous but installing them won't hurt anything.
>
>Cheers,
>Steve K7LXC
>TOWER TECH -
>Professional tower services for amateurs
>Cell: 206-890-4188
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
Jim Rhodes K0XU
jim@rhodesend.net
Experience is the thing you have left when everything else is gone.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|