[TowerTalk] Matching coax lengths for stacking Yagis?

["Paul Jansen" <PJansen@cctent.com>]

Is it possible to use an analyzer to check transmission line length if the
end is terminated in a balun such as those used on the KT34A? 

 - Possibly by using it at a much higher or lower frequency than the balun
was designed for?  

 

I'm trying to avoid having to remove all the coax seal etc. and then
shorting out the end as instructed.

 

Any suggestions?

 

Thanks, 

 

Paul / K9KDR

 

 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk