I don't know if our gain/spacing is similar, but my 6m stack is always
louder on "both" than on either antenna alone.
Chuck W5PR
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Gregg Seidl
Sent: Sunday, April 02, 2006 6:55 PM
To: [email protected]
Subject: [TowerTalk] phasing
I would like to know if there is a way to check phasing of antennas.I'm in
the process of installing 2 M2 6M-7JHV's.I am using a Comtek stack-match
made for 6 meters.Is there a way to check that the phasing is right.I have
antennas stacked for the other bands 2m.432 1296 and 2304 but never really
CHECKED to see if the phasing is right.Any ideas.I have some test gear but
quite limited really.MFJ-269B and of course an ohm meter. Gregg K9KL
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|