Towertalk
[Top] [All Lists]

Re: [TowerTalk] rotor placement

To: towertalk@contesting.com
Subject: Re: [TowerTalk] rotor placement
From: Jim Hoge <knowkode@sbcglobal.net>
Date: Sat, 15 Apr 2006 13:00:17 -0700 (PDT)
List-post: <mailto:towertalk@contesting.com>
Greetings,
   
  Let me chime in with my experiences. If you already have a tower up, 
retrofitting to a bottom rotor will be a major undertaking. Building up the 
tower and mast at the same time is far easier than trying to thread masting 
through an existing tower and radial bearings. Consider also your method of 
joining mast sections. A solid splice will encourage splitting from ice. My 
biggest complaint is the lack of footholds on a Rohn 25 sized tower. You WILL 
have to climb the tower and with only the ability to get your toes over each 
rung of the z-brazing, you will quickly tire. I'm not sure what's worse to 
climb, an HDBX style tower or a Rohn 25 with a bottom mounted rotor.
   
  gl,
  Jim W5QM
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>