Towertalk
[Top] [All Lists]

Re: [TowerTalk] KT34A and no tower

To: Scott Stembaugh <radio.n9ljx@gmail.com>, towertalk@contesting.com
Subject: Re: [TowerTalk] KT34A and no tower
From: Hector Garcia XE2K <j_hector_garcia@sbcglobal.net>
Date: Sun, 21 May 2006 20:43:34 -0700 (PDT)
List-post: <mailto:towertalk@contesting.com>
scott:

that installation you have in  mind will be good just
for medium size TV antenna or just a 2m 12ft boom yagi

just with luck a 3 elements 10m yagi 

but not a KLM  KT34A 

i think your mast is a telescopic mast rohn type, 

maybe  2- 2.5 inch diameter heavy wall maybe can work
as mast  in your plans,  the separation in the rotor
-antenna is too big,  at most 1 ft , the rotor hd73 is
light duty.

ask to a pro for your specific installation need,
there are several options easy and more safe.

roof tower is a good one 


--- Scott Stembaugh <radio.n9ljx@gmail.com> wrote:

> I am picking up a KLM KT34A tomorrow, but I have no
> tower to mount it
> on yet.  How risky is just mounting it and the rotor
> (hd-73) on a mast
> approximatley 27' in the air?  The 20' mast will be
> mounted to the
> house at 3' and 18'.  The antenna will be approx 6'
> above the rotor.
> Am I taking a bad risk or should I be OK for the
> short term?  What is
> the minimum sized mast I should use below the rotor?
> 
> The specs on the beam are 16' boom, 25' longest
> element, and 45lbs.
> 
> Thanks and 73,
> --scott
> 
> -- 
> ------
> N9LJX
> radio.n9ljx@gmail.com
> http://web.ics.purdue.edu/~scott/
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
>
http://lists.contesting.com/mailman/listinfo/towertalk
> 


Hector Garcia XE2K / XF1K
Mexicali B.C  DM22fp

http://www.dxxe.org
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>