What is your antenna objective?
An alternative approach that would seem very good is a Steppir Monstr just
above the tower and then another Steppir above on the mast--possibly a 4 or
3 or 2 element that could be rotated independently from the Monstr?
k7puc
----- Original Message -----
From: "Allen R. Brier" <britech@earthlink.net>
To: "'Tower Talk Reflector'" <towertalk@contesting.com>
Sent: Sunday, August 13, 2006 11:05 PM
Subject: [TowerTalk] Mast size/material for stacking not-so-big beams
> This is a two part question:
>
>
>
> I am planning to install a 4-el SteppIR at 70 ft and possibly another HF
> beam above it in the future. One plan is to install a 10-Meter monobander
> in
> a few years when the spots come back. Another is to install a 2 or 3 el
> 40-meter monobander.
>
>
>
> 1. How much benefit would I get mounting the 10-meter mono above the
> SteppIR on the same mast and how far should I space it if I do it.
> 2. What size and material mast should I use if I mount a 40-meter beam
> above the SteppIR? (Material / length / wall thickness, etc)
>
>
>
>
>
>
>
> Allen Ross Brier, N5XZ
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|