Towertalk
[Top] [All Lists]

Re: [TowerTalk] homebrew low voltage surge suppressors?

To: "'Keith Dutson'" <kdutson@sbcglobal.net>,"'Tower'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] homebrew low voltage surge suppressors?
From: "Dick Green WC1M" <wc1m@msn.com>
Reply-to: wc1m@msn.com
Date: Wed, 27 Sep 2006 11:02:46 -0400
List-post: <mailto:towertalk@contesting.com>
No, I'll need 24 of them -- one at each end, tower and shack. 

> -----Original Message-----
> From: Keith Dutson [mailto:kdutson@sbcglobal.net] 
> Sent: Wednesday, September 27, 2006 10:54 AM
> To: 'Tower'
> Subject: Re: [TowerTalk] homebrew low voltage surge suppressors?
> 
> WOW, they certainly have gone up in price! The RCT is now $99 
> at AES.  But you will need 12 of the 8 wire RCTs, so that is 
> $1200.  Let us know if you find a cheaper alternative. Thanks.
> 
> 73, Keith NM5G
> 
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of Dick Green WC1M
> Sent: Wednesday, September 27, 2006 9:36 AM
> To: Tower
> Subject: [TowerTalk] homebrew low voltage surge suppressors?
> 
> My new tower will have three 4-el SteppIRs, three TIC rings, 
> a T2X, a stack match and an SO2R switch box. That comes to 96 
> control wires. Since the tower is over 200 feet from the 
> shack, it's best to have a surge suppressor at both ends of 
> each wire. I used Polyphaser RCT surge suppressors for my 
> other tower, but the price has about doubled since I did 
> that. I'm looking at close to $3,000 worth of RCT surge 
> suppressors. Besides, the RCT mounting hardware is really 
> designed to clamp to a tower leg and I'll be mounting the 
> suppressors on ground panels inside metal NEMA boxes. I've 
> done that before and wasn't real happy with the result. Even 
> if I go with the ICE units, which have better mounting, the 
> cost will be quite high. 
>  
> So, I'm wondering if anyone has seen or designed a homebrew 
> low voltage surge suppressor circuit? My understanding is 
> that it takes more than just low voltage MOVs. You need 
> series inductance and/or resistance and a diode.
> I haven't found anything appropriate on the web. Can someone 
> point me to a schematic and/or tell me how they did it?
>  
> 73, Dick WC1M
>  
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> 
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>