Towertalk
[Top] [All Lists]

Re: [TowerTalk] Need Advice on Long Wire Antenna Materials

To: "Edward Sylvester" <navydude1962@yahoo.com>,<TowerTalk@contesting.com>
Subject: Re: [TowerTalk] Need Advice on Long Wire Antenna Materials
From: "paolo odone" <paolo@odone.it>
Date: Mon, 16 Oct 2006 07:29:35 +0200
List-post: <mailto:towertalk@contesting.com>
I used a 3,5 mm (0,138 inch) aluminum wire. Very light , not too much sag.
Trees were about 80/100 feet high, I was using an automatic antenna tuner 
(Icom AH2)
Worked easily many rare DX particularly on 40 and 80 100w of power
Paul, i1odp

----- Original Message ----- 
From: "Edward Sylvester" <navydude1962@yahoo.com>
To: <TowerTalk@contesting.com>
Cc: "Paul" <marinesvcs@earthlink.net>
Sent: Monday, October 16, 2006 6:23 AM
Subject: [TowerTalk] Need Advice on Long Wire Antenna Materials


> Though not directly pertinent to towers, I thought this would be a good 
> group to poll for wire advice.  My friend and I are trying to optimally 
> utilize some very tall cedar pines on his 5 acre property.
>
>  We've decided that a Long Wire is best, for now.....The spance between 
> the two support trees is ~1000 feet.  What kind of wire would you use for 
> this application, keeping in mind the continuous swaying of the trees, the 
> distance, the elements, etc?
>
>  We only wanna have to do this once, so all solemn advice will be taken 
> seriously!
>
>  Thanks and 73,
>  Ed NI6S
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Get on board. You're invited to try the new Yahoo! Mail.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>