Towertalk
[Top] [All Lists]

[TowerTalk] Please Help Identify This Tower & Questions

To: towertalk@contesting.com
Subject: [TowerTalk] Please Help Identify This Tower & Questions
From: "BRENT BAUM" <brentbaum5323@msn.com>
Date: Fri, 20 Oct 2006 09:19:38 -0600
List-post: <mailto:towertalk@contesting.com>
First, sorry for the length of the post. My digital camera died so I'm 
giving the "thousand words".

Background: I was given this tower by our local historic/scenic railroad 
after I rebuilt their antenna and radio system for them. They acquire a lot 
of stuff through military and other surplus venues, so I suspect this tower 
may have been military.

The Tower: Basically it is a fold over, crank up in 4 ten foot long 
sections. I believe it is made from hard drawn aluminium, welded cross 
braces of 1/4" or so rod, and has at least two layers of paint, OD green and 
under that a medium blue. It is triangular and the bottom section measures 
18" across the face with 1 1/4" o.d. tubular legs. The other 3 sections have 
1" o.d. legs and are 14", 12", and 10" across their faces. The bottom 
section has a heavy duty pivot/hinge at 32" up from the base to which is 
attached a mount with a cut out to receive the antenna when it is upright. 
The mount has 4 bolts about 7/16" diameter. When swiveled to the upright 
position the face of the mount is 20" from the base. The base section also 
has an anti climb guard of expanded mesh welded to all 3 sides extending up 
48". The top section has two plates for mounting a 2" o.d. mast that are 3 
1/2" apart, and 2 T-handle set screws to hold the mast. The top of each 
section has a rotating sheave (pulley) for about 1/4" cable, while the 
bottoms of the sections have a welded half-sheave. I suspect this was a 
trailer or truck mounted tower at one time.

Questions: A.) What tower is this?  B.) I plan to mount the pivot base on a 
couple of 4x4 I beams sunk vertically into the usual type of concrete tower 
base. Do I stand a chance of blowing the concrete apart over time? (I'm in 
northern Utah.) C.) Should I guy the tower when it is at full extension? D.) 
Any suggestions for routing the hoisting cable? and E.) Any estimates as to 
what antenna size this thing will handle? Wasatch county wind speed is 70 
mph.

Thanks for your help.
de K7MEI, Brent


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Please Help Identify This Tower & Questions, BRENT BAUM <=