Towertalk
[Top] [All Lists]

Re: [TowerTalk] Guying an Aluminum Tower

To: "Dennis W0JX" <w0jx@yahoo.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Guying an Aluminum Tower
From: "mryan001" <mryan001@tampabay.rr.com>
Date: Tue, 21 Nov 2006 10:59:07 -0500
List-post: <mailto:towertalk@contesting.com>
This is like a trapeze artist wondering if he should work without a net.
This idea is flawed from the get-go. A SELF supporting tower is just that.
It is not designed to be guyed and should not. If you get a warm fuzy
feeling about guying the tower, that it is ok since you are overloading it,
you should re-think that. That being said  the 80% rule applies to guy
points be laid out at a distance of 80% of the total height of the tower,
the antennas AND the mast above the tower. If you have a 10ft mast out of
that tower you have a total height therefore of 90ft.  Guy points for a
GUYED tower would start at 72ft.  I don't know much about Universal Tower. I
would call them and ask them what they think. I'd bet they'll talk you out
of it. Good luck in any event. - Mike

One more post script to this. I think in my humble opinion, that this tower
being aluminum may also weigh highly in the BETTER NOT column. You may live
in a very temperate climate with soft breezes and gentle swaying palms but
this just does not sound like a good idea to me.


-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of Dennis W0JX
Sent: Tuesday, November 21, 2006 10:39 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Guying an Aluminum Tower


Looking for a recommendation re guying an 80 ft Universal Aluminum
self-supporting tower. It is comprised on 30, 26, 26, 22, 22, 18, 18, and 14
inch sections. Currently a TH6DX is on top. I have a TH11 to replace the TH6
and I also want to add a 2 el short
  Forty. That will overload the current tower so guys are necessary.

  The usual recommendation is to guy out 80% of the tower height. However, I
have some property limitations that make doing that very difficult. Given
that it is a
  self-supporting tower, can I come in a bit, say 70% of height and still
get guying advantages?

  I also wonder about the possibility of guying to the bases of some very
big, strong
  trees at the perimeter of my property. Any suggestions?

  73, Dennis W0JX


---------------------------------
Sponsored Link

Mortgage rates near 39yr lows. $420,000 Mortgage for $1,399/mo - Calculate
new house payment
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.14.11/543 - Release Date: 11/20/2006


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>