[TowerTalk] Tower grounding

["Roger Kissel" <kc8hz@hotmail.com>]

John

While I agree with you on grounding to a water pipe (and main) and I 
acknowledge the fact that you are a licensed electrician, there is one thing 
that bothers me about your statement. Maybe the code is (currently) wrong 
but the fact that you have not mentioned something else bothers me.

You said: a second panel ground should run to the water main and terminate 
on the street side of the valve.

I don't see what good this will do when many of the waterlines, not only in 
the houses and out to the street but also under the street are PLASTIC.   
You might suggest that there is grounding thru the water, but I doubt that a 
high resistance ground that is incapable of carrying much current is of much 
benefit.

In my case, I have 1400 feet of plastic pipe out of the house to the water 
main. Then the water main (it runs from a distant town to my town, a 
distance of about 10 miles. I saw the pipe being installed so I know what it 
is) is a 12 inch plastic pipe.

Please enlighten me on the benefits of the code.

Roger
KC8HZ


ny6dx wrote:

By code the outside panel ground should be in direct contact to earth and
terminated at ground rod. a second panel ground should run to the water main 
and
terminate on the street side of the valve. This is in case you lose the 
nuetral
from the pole you do not send 220 volts throughout the house.
P.S.
I am a licensed electrician if that matters.

_________________________________________________________________
Dave vs. Carl: The Insignificant Championship Series. ?Who will win? 
http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://davevscarl.spaces.live.com/?icid=T001MSN38C07001

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk