I use a fence post driver here, and sledge hammer for the last couple of
feet.
73, Tim - N3XX
----- Original Message -----
From: <Cqtestk4xs@aol.com>
To: <TOWERTALK@contesting.com>
Sent: Thursday, January 18, 2007 12:50 PM
Subject: [TowerTalk] Ground Rods in rocky soil
> After being spoiled by Florida's sugar sand in which you could dig a hole
> for a base for holes and anchors by hand and drive a ground rod down by
> "jetting" it, I now live on one of the biggest rock piles in the world.
>
> Most of the Big Island of Hawaii has solid lava rock. Fortunately, my
> area
> is a little bit better...a mix of clay, small rocks and rocks up to a
> foot
> across, certainly not the kind of stuff easy to get into. Sometimes the
> layer
> of pure clay is just a few inches thick, in other places it can be ten
> feet
> deep. Ground rods and copper are pretty expensive out here and I don't
> want
> to experiment losing rods just a couple of feet into the ground and
> getting
> stuck at that depth.
>
> I know I can use a backhoe to dig the holes and will have one on the
> property to dig the cesspool, but what is the best way to go getting
> ground rods in?
> I asked the locals at one of the radio club meetings and they weren't
> much
> help. Responses were.....most guys just drive it in a foot or so and use
> radials. Since the station will sit on a hill, I really don't feel too
> secure
> putting the rod in only a foot, however I do plan on running the radials,
> since I know it will help.
>
> Any ideas?
>
> Bill K4XS/KH7XS
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|