Towertalk
[Top] [All Lists]

Re: [TowerTalk] Hy-Gain Balums or Coaxial Coil?

To: "KC4HW" <jimjohnson@alaweb.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Hy-Gain Balums or Coaxial Coil?
From: "Bob Maser" <bmaser@tampabay.rr.com>
Date: Mon, 26 Feb 2007 22:05:13 -0500
List-post: <mailto:towertalk@contesting.com>
Why not just buy a new 1:1 current balun?  The HyGain balun was not the 
greatest when new, let alone 30 years old.  I will be putting up a 205BA in 
the near future and I wouldn't think of using one the original baluns.  They 
weren't built heavy enough for today's maximum output power.

Bob W6TR
----- Original Message ----- 
From: "KC4HW" <jimjohnson@alaweb.com>
To: <towertalk@contesting.com>
Sent: Monday, February 26, 2007 8:11 PM
Subject: [TowerTalk] Hy-Gain Balums or Coaxial Coil?


>I have been renovating a set of Hy-Gain monobanders.  These had the Hy-Gain 
>balum with
> them.
>
> I have opened one of the balums and beside a little oxidation at the SO239 
> they appears to
> be in pretty good condition.  I notice that there appeared to be a rubber 
> o ring at both ends
> of the ferrite material that has sort of gone away.  I don't know if that 
> is a big deal..
>
> Anyway, what to do... use the balums or coil coax, anybody got any 
> suggestions?
>
> Thanks
>
> Jim/KC4HW
> http://www.AlabamaContestGroup.org
> http://www.AlabamaQSOParty.org (June 2nd and 3rd, 2007)
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>