Towertalk
[Top] [All Lists]

Re: [TowerTalk] Ideas for a 10/12/15m beam

To: "KD5SFA" <divenut1@sprynet.com>,"'reflector -tower'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Ideas for a 10/12/15m beam
From: "Vic Sadesky" <vsadesky@ccis.com>
Date: Thu, 15 Mar 2007 17:46:27 -0700
List-post: <mailto:towertalk@contesting.com>
Jon

I am a new convert to Force 12 having just put one up.  For a lite weight 
effective tribander, look at the C3.  New or used it's a performer.  Plus 
you will only need a tuner for extra coverage on 10M or the WARC bands.

73
Vic Sadesky KI6VC
Cal City
"Our doubts are traitors,
And make us lose the good
we oft might win
By fearing to attempt."
                  William Shakespeare
"Get'er Done"
                  The Cable Guy

----- Original Message ----- 
From: "KD5SFA" <divenut1@sprynet.com>
To: "'reflector -tower'" <towertalk@contesting.com>
Sent: Monday, March 12, 2007 10:04 AM
Subject: [TowerTalk] Ideas for a 10/12/15m beam


>
> I've got a Kenwood TS-660 that I am looking
> to dedicate a small HF beam to.  I have a 3el
> yagi for 6m that I will also be using but would
> like to small beam just for the HF side as well.  This
> will be all QRP operation.  I may consider something
> along the lines of a MA5B as I can use my 706MKIIG or
> TS-850S/at with.  Currently I have a 170' run of RG-8U
> from my temporary station to the apex of my OCF dipole
> at 53'.  It's cut for 80m.  I want to do something
> closer to my station on a pushup pole (bracketed to
> house and top guyed) or 30' of tower (bracketed to house)
> so that my run is 50' or less.
>
> 73,
> Jon
> KD5SFA
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>