In a message dated 3/25/2007 6:16:02 P.M. Greenwich Standard Time,
stang416@magma.ca writes:
My indicator for the Ham IV rotor is not showing the correct direction
now, in fact, when I change the direction it sometimes does not
continually move, then it will jump a considerable degrees
Is there a problem with the rotor or is the wiper arm in the rotor dirty?
It could be just dirty, or more likely, the resistor has some spots that are
not good. Try cleaning and if it doesn't work, spring for a new one.
Replacing it is an easy job.
Bill K4XS/KH7XS
************************************** AOL now offers free email to everyone.
Find out more about what's free from AOL at http://www.aol.com.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|