Towertalk
[Top] [All Lists]

Re: [TowerTalk] Yaesu G2800 Rotor Calibration Question and Complaint

To: Pete Smith <n4zr@contesting.com>, k2xx@swva.net
Subject: Re: [TowerTalk] Yaesu G2800 Rotor Calibration Question and Complaint
From: Jim Lux <jimlux@earthlink.net>
Date: Mon, 26 Mar 2007 10:55:13 -0700
List-post: <mailto:towertalk@contesting.com>
At 08:36 AM 3/26/2007, Pete Smith wrote:
>I'm inclined to agree with Joe here.  It used to be that Yaesu would send
>you small parts gratis (things like dial light bulbs for rotators) but
>recently the ante has gone way up and nothing's free any more.  Another pet
>peeve of mine is the amount of stuff that they are buying from outside
>suppliers - that seems to include all of their rotators, the insides of the
>FP-29 power supply, etc.  That makes replacing anything in them pretty
>stiff.  It could be that their supplier is gouging them on the connector.

Or, you're just seeing the stackup of everyone's 20% margin in the 
chain.  All you need is a couple tiers with the mfr providing retail 
price protection at the factory (i.e. the factory guarantees it will 
never sell cheaper than a retailer, so their supply and distribution 
chain can always make some money) and a moderate minimum order 
qty/fee, and you can ratchet up a $5 part to a $50 transaction.

This seems to be very common with odd-ball connectors too...


Jim, W6RMK 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>