In a message dated 5/16/2007 10:59:52 A.M. Pacific Daylight Time,
towertalk-request@contesting.com writes:
> Id like to mount some 25G to a roof peak with two very different angles.
Rather than cobble up something from scratch I wonder if there is an
available product or specs on building one. The Rohn PR25G would require
some modifications even if I could find one at a reasonable price.
I own and am quite experienced with a MIG so fabrication is just a matter of
time if I really want to get it done. Im basically lazy!
You could certainly modify an existing housebracket but be careful of
any welding with the hot dipped galvanizing in place. No, there isn't a
modifiable housebracket available or any specs.
It might be easier to fabricate the bracket specifically for your
application. Just take a drawing to a local welding shop and they'll put one
together
for you. Get some nuts and bolts and
U-bolts and you're in business.
Tony, K1KP wrote a very good article on housebracketing some years ago.
It's worth reading to see what the real engineered solution is.
Cheers,
Steve K7LXC
TOWER TECH
************************************** See what's free at http://www.aol.com.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|