Tom et al,
What are the size and spacing of the holes of a typical TVRO dish?
I have a six foot, 900 MHz grid dish that I overlayed with 1/4 inch
galvanized hardware cloth and would like to know the wind loading at various
wind speeds.
Any ideas?
73,
Gordon Beattie
201.314.6964
W2ttt@att.net
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Tom Ed Moore
Sent: Sunday, May 20, 2007 4:49 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Dish on a tower
This may have already been addressed? A TVRO mesh dish becomes a solid
object at winds around 35 to 40 MPH. This will vary with pressure and
humidity(usually an inverse relationship).
Tom
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|