Towertalk
[Top] [All Lists]

Re: [TowerTalk] SteppIR and EZNEC

To: Bill Turner <dezrat@copper.net>
Subject: Re: [TowerTalk] SteppIR and EZNEC
From: "Joe Giacobello, K2XX" <k2xx@swva.net>
Reply-to: k2xx@swva.net
Date: Mon, 11 Jun 2007 15:02:19 -0400
List-post: <mailto:towertalk@contesting.com>
Bill, I have been trying to get the same files on both this forum, the 
Steppir list and directly from Fluid Motion.  Surprisingly, even FM 
claims not having these files even though they claim in their 
advertising to have used EZNEC to model all their original antennas.  I 
am about ready to go ahead and do them myself, but if you find any 
please advise.

73, Joe
K2XX

Bill Turner wrote:

>Has anyone done some EZNEC files on a SteppIR? 
>
>I would be interested to compare the patterns with a comparable, but
>fixed element, non-trapped yagi. It would be especially useful to have
>a series of files covering a band with the SteppIR element lengths
>adjusted for optimum at each frequency. Presumably the SteppIR
>patterns would be essentially the same over a band while the yagi
>would vary. 
>
>If so could you post them or email then to me? 
>
>Thanks in advance,
>
>Bill W6WRT
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>  
>

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>