Towertalk
[Top] [All Lists]

Re: [TowerTalk] RF Choke or Balun

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] RF Choke or Balun
From: "Perry - K4PWO" <k4pwo@comcast.net>
Date: Wed, 13 Jun 2007 15:35:05 -0500
List-post: <mailto:towertalk@contesting.com>
Unless you use one of the low loss coax types that don't like tight radius 
turns.  The center conductor tends to migrate toward the shield in tight 
turns.

73 de Perry - K4PWO
----- Original Message ----- 
From: "Tom Rauch" <w8ji@contesting.com>
To: "Mike K9MI" <mike@k9mi.com>; "Pat Barthelow" <aa6eg@hotmail.com>; 
<wboxq@grandecom.net>; <towertalk@contesting.com>
Sent: Wednesday, June 13, 2007 2:23 PM
Subject: Re: [TowerTalk] RF Choke or Balun


>
>>I "read the book" and for my Hy-Gain TH3 tribander it says
>>12 turns 6"
>> diameter. Is this one case where you get bad advice from
>> doing what the
>> manual calls for????
>>
>> 73 Mike K9MI
>
>
> That's fine. There are a dozen ways to do it, but that would
> be OK.
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>