Towertalk
[Top] [All Lists]

Re: [TowerTalk] SteppIR problem...size wires? ala KH6

To: "David Gilbert" <xdavid@cis-broadband.com>
Subject: Re: [TowerTalk] SteppIR problem...size wires? ala KH6
From: "Kelly Johnson" <n6kj.kelly@gmail.com>
Date: Mon, 18 Jun 2007 14:20:31 -0700
List-post: <mailto:towertalk@contesting.com>
Maybe, maybe not.  It's just another possibility.  The point is that
there HAS to be a way to make it work without moving the tower closer
to the house :-)


On 6/18/07, David Gilbert <xdavid@cis-broadband.com> wrote:
>
> Wouldn't it be simpler to design a proper line driver that would
> interface the SteppIR controller to a long cable?
>
> Dave  AB7E
>
>
>
> Kelly Johnson wrote:
> > Would it be possible to locate the SteppIR controller at the base of
> > the tower and remotely control the controller itself from the shack?
> > I think there are software programs that allow you to control the
> > controller via computer.  You could have a computer at the base of the
> > tower connected to the SteppIR controller.  The computer could then be
> > remotely connected to a computer in the shack via ethernet cable,
> > WiFi, or whatever.
> >
>
> > On 6/18/07, john@kk9a.com <john@kk9a.com> wrote:
> >
> >> Bill, I would be very concerned about using a 650' control cable for this
> >> antenna after reading about all of AH6FC's problems with a four element
> >> SteppIR and a 500' cable.   You'll need the factory to assure you that this
> >> antenna is designed to work with such a long cable before purchasing it and
> >> shipping it to Hawaii.
> >>
> >> John KK9A
> >>
> >>
> >>
> >
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>