A friend of mine, K5EE, now SK, modified a prop pitch motor to screw these
things in. FWIW. 73, Dan, N5AR
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of R Atkins
Sent: Monday, July 16, 2007 7:58 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] AB Chance anchor installation... How!?!
Thought I mentioned this,.. maybe I didn't. I'm on the verge of exhaustion
and not thinking real clearly. This installation is on a heavily wooded lot
and on a steep slope. There is no way at all for any machine to get back to
them (the anchors).
In short, if it can't be lugged up a steep hill and between trees for 1/10th
mile, it can't be used.
So, where do I get the solid still bar?
Also, somebody mentioned an AB Chance contractor that used a hydraulic auger
and one person (at least it sounded that way) installed them by hand.... Is
this correct, and if so, how do I get ahold of a similar person in this
area? I'm a VERY hands-on guy, but I will definitely pay somebody to twist
these things in.
Rusty
K0FE
____________________________________________________________________________
________
Get the Yahoo! toolbar and be alerted to new email wherever you're surfing.
http://new.toolbar.yahoo.com/toolbar/features/mail/index.php
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|