Well it took me a little longer than expected since I figured if I was going to
build a test cable I might as well build the final cable. I got my 8 & 6
conductor rotor cable finally and built the entire assembly.
It works fine. It is good thing I decided to mount the cap at the base of the
tower because I figured out it was too large to fit inside the Ham 2 (the all
metal one) control box anyway.
Next step is to mount it in the tower top, mount the T-6 and call my Elk's
Lodge Brother with the Bucket Truck.
Clint - W5CPT
<snip>
I got mine from the local HVAC guy. I will build a test cable tomorrow and
report back.
Clint - W5CPT
<snip>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|