The 12' of aluminum is at the top- the Chromemolly is in the tower. The
aluminum portion of the mast has VHF/UHF antennas mounted on it; probably
the heaviest thing on the top 12'of the mast is the FAA OB2 lights a foot
down from the top.
Doug
K4AC
> From: john@kk9a.com [mailto:john@kk9a.com]
>
> Is the aluminum on the rotator side of the mast or the top? Hopefully
> the
> Chromemolly is on the bottom. If the 6' piece in the tower is bowing,
> the
> 24' sticking out of the tower must really be bowing. You could
> minimize
> this by using a 3" mast.
>
> John KK9A
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|