Just in case anyone is interested in what a typical set of sweeps, from
a typical PCS feedline looks like, I uploaded a pdf file to:
http://www.box.net/public/tedic3zmd0
This feedline happened to be a 143' piece of LDF5 with a 6' LDF4 jumper
on top (clearly seen in the Distance to Fault sweep). All 7/16 DIN
connectors.
In the Cable Loss sweep over 1850-1990 MHZ, the increasing loss with
frequency trend can just be seen.
Steve K8LX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|