Chuck,
I had to get a piece of fiberglass rod for an insulator fro my Butternut
used that had pieces missing. I found it available from McMaster Carr if
you have to order one.
73, de Jim KG0KP
----- Original Message -----
From: <KI9A@aol.com>
To: <towertalk@contesting.com>
Sent: Saturday, October 06, 2007 8:56 AM
Subject: [TowerTalk] GAP Voyager failure
> Guys-
>
> I know the big Voyager has mechanical issues, according to some, but, I
was
> raising one that was up at a previous QTH for about 4 months, with no ice
> storm, or wind storm damage.
>
> While walking it up, about 3/4 up, the coupler between the lower & mid
masts
> failed, and broke in 2.
>
> Luckily, the only other damage was a slight bend on one of the tuning
rods,
> and a little bend on the cap hat.
>
> Anyone ever hear of a failure at that point of the antenna? Seems weird it
> would fail there and not higher in the mast, where there seems to be a
much
> larger load.
>
> 73-Chuck KI9A
>
>
>
> ************************************** See what's new at
http://www.aol.com
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|