Tower Talkers
It's called "frequency at cut off " An opening that's smaller than
1/4 wave length will block all signals lower in frequency.
de Norm N8NH
At 04:36 PM 5/31/2008, David Gilbert wrote:
>Hi, Warren.
>
>I was going to suggest that 1/10 wavelength grid spacing at the highest
>frequency you want to shield would be sufficient, but I found this
>reference that recommends 1/20 wavelength.
>
>http://www.hollandshielding.com/pdf/emiemc_encyclopedia.pdf
>
>By the way, I didn't make it to the post office in time yesterday, so
>the disk I promised you won't go out until Monday. Sorry ...
>
>73,
>Dave AB7E
>
>
>
>warrenwolff@aol.com wrote:
> > This cage idea has always intrigued me.
> >
> > The copper mesh may be the cheapest and easiest way
> > to accomplish such an arrangement, BUT, it there a
> > maximum mesh size?
> >
> > It seems that one might find it just as effective to run
> > a? "nest" of copper wires, say 3 feet (or other) apart
> > and accomplish the same thing.
> >
> >
> > Warren; W7WY
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> >
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|