I think I chose something around 39ft for my wire sets. But you are right
most of the old ARRL Antenna or Handbooks has that info. - Mike
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Michael Germino
Sent: Thursday, July 17, 2008 11:05 AM
To: k5mlc@sbcglobal.net
Cc: towertalk
Subject: Re: [TowerTalk] another stupid guywire question
Get a copy of the ARRL Antenna book. It has a nice chart to show the
ungrounded wire lengths to avoid. Each band needs a different length.
From the book
"Grounded wires will exhibit resonance at odd multiples of a quarter
wavelength"
"For example, if you operate only the 14, 21 and 24-MHz bands, guy wire
lengths of 27 feet or 51 feet would be, suitable, along with any length less
than 16 feet."
From looking at the chart, it looks like for 10, 15 and 20 meters that
about 27 feet and any length less than 14 feet would be good.
Mike
AD6AA
"K5MLC (Mike)" <k5mlc@sbcglobal.net> wrote:
So, do you mean the insulators should be at 27' or less or more than 27'?
73 de K5MLC Mike
----- Original Message ----
From: bill rubin
To: K5MLC (Mike)
Sent: Wednesday, July 16, 2008 6:55:24 PM
Subject: Re: [TowerTalk] another stupid guywire question
i would recommend EHS as well. also the rule of thumb for the insulators is
~27ft. so i heard. I used and recommend using phillystran (Kevlar rope)
made for guy lines combined with EHS at the bottom. see more info at
texastowers.com
73 Bill N1HWC
see my tower project at n1hwc.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
__________ NOD32 3276 (20080717) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|