Hello all,
I want to thank everyone who took the time to answer my request for Hazer
info.
I received much food for thought; regarding what I'm going to do, be it some
form of Hazer setup or a guyed crank-up tower I don't know....
Again, thanks!
Dennis, k0eoo
----- Original Message -----
From: <WB4UNA@aol.com>
To: <TowerTalk@contesting.com>
Sent: Wednesday, July 30, 2008 6:17 PM
Subject: Re: [TowerTalk] hazer comments
>I have had and still do , Have Hazers on both of my towers and am going to
> install 2 more on 2 other towers. I have had some problems but nothing
> that
> would make me not use them. I have had them loaded to the max and they
> worked
> great. I have found that if you put a small antenna that does not weight
> much
> the Hazer will get stuck in a location or two but a pull on a guy wire
> and it
> comes down ok.
> I have the guys mounted on the bottom of the Hazer . I have a fiend
> that
> has one and we mounted a sent of guys below the Hazer with 3 sections of
> cable that goes down below and has 3 more guys attached to a frame that
> goes
> around the tower and when you crank the hazer up the lower guys follow
> the hazer
> up . The tower is at 75' and has no problems at all....
>
> just my 2 cents worth.......
>
>
>
> Carlus M. Randy Chavis
> WB4UNA since 1970
> 432 tru 160
>
>
>
> **************Get fantasy football with free live scoring. Sign up for
> FanHouse Fantasy Football today.
> (http://www.fanhouse.com/fantasyaffair?ncid=aolspr00050000000020)
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> __________ NOD32 3301 (20080727) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|