I sold a bunch of 8 pin trailer connectors at Dayton 2008. I think I
have 3 pairs left.
Doug
The water jump is long and the barrier may be high,
you might break every bone, but it's so much fun to fly!
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of W5CPT
Sent: August 9, 2008 9:09 AM
To: Randy; [email protected]
Subject: Re: [TowerTalk] quick-disconnect for rotor wires etc.?
I used two 4 Pin Trailer connectors - back to back. That is one has the
female on the rotor and the other has the male on the rotor with the
matching pieces on the cable. They are designed to be used outdoors and
are waterproof. They can be had at any place that handles auto parts.
They do make an 8 pin but to my knowledge they are not available
locally.
Clint - W5CPT
----- Original Message -----
From: Randy
To: [email protected]
Sent: Saturday, August 09, 2008 9:41 AM
Subject: [TowerTalk] quick-disconnect for rotor wires etc.?
Hi TT'ers.
What is the most economical and/or preferred method of disconnecting
rotor wires, remote coax switch wires, etc.,
when not in use? Cinch-Jones plugs? And who has the best deals on such
connectors?
Thanks.
73,
Randy
KZ4RV
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|