-----Original Message-----
>From: "Michael E Fox (N6MEF)" <n6mef@mefox.org>
>Sent: Oct 15, 2008 1:01 PM
>To: towertalk@contesting.com
>Subject: [TowerTalk] N-connector double-D punch
>
>I'm looking for what's called a "double-D" punch that is the correct size
>for N-type connectors. This will be used to punch holes in bulkheads for
>installing either PolyPhaser DSXL lightening arrestors or N-type Amphenol
>bulkhead pass-through connectors.
>
>
>
>Greenlee doesn't make a double-D that is small enough and I'm having
>difficulty finding the right size anywhere.
Since you can get D and DD punches for BNC and TNC, which are smaller, I'm
surprised you can't find one.
However, I don't do punching any more... I send my work to
http://www.frontpanelexpress.com/ and they do a fabulous job putting all manner
of weird holes, with engraved lettering, and paint, etc. You download their
tool, design your panel, get the quote, send the order, and a week later, your
panel arrives.
$50-100 will buy a very nice panel.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|