Towertalk
[Top] [All Lists]

Re: [TowerTalk] LM-470 and a T2X Rotor

To: "donhall161" <donhall161@sbcglobal.net>, "Bill Gaines AD8P" <ad8p@wcoil.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] LM-470 and a T2X Rotor
From: "Bob Maser" <bmaser@tampabay.rr.com>
Date: Wed, 3 Dec 2008 17:51:43 -0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have a rotor plate for the 470 and the standard(non-HD) 354.  It is cut 
out for a prop pitch but could probably be modified to work with a T2X.  It 
is of no use to me as I have a 354HD.

Bob W6TR
----- Original Message ----- 
From: "donhall161" <donhall161@sbcglobal.net>
To: "Bill Gaines AD8P" <ad8p@wcoil.com>; <towertalk@contesting.com>
Sent: Wednesday, December 03, 2008 4:35 PM
Subject: Re: [TowerTalk] LM-470 and a T2X Rotor


> Bill,
>
> The LM470 and the LM354 both have the same top section.
>
> I have had a T2X in my 354 for all its life. Fitting it in requires a
> special mounting plate to clear the side braces.
> It has spacers to raise it up to allow clearance.
>
> Check Tashjian towers for the one needed or see if someone on this 
> reflector
> has an extra.
>
> 73  Don  K5AQ
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>