I ran the cables at the top of the tower through a piece (~4') of pretty
heavy
garden hose and attached the hose in several places to the tower top with
a large radius bend. They come down from a standoff which is perhaps
2' away from the tower. They never get tangled.
k7puc
----- Original Message -----
From: "Dick Dievendorff" <dieven@comcast.net>
To: "'Jim Garland'" <4cx250b@muohio.edu>; <TowerTalk@contesting.com>
Sent: Wednesday, January 14, 2009 8:54 AM
Subject: Re: [TowerTalk] Cable management on crankup towers
>I have coax arms that just guide the coax, the coax isn't fastened except
>at
> the top coax arm (with Kellum grips). When the tower comes down, the coax
> gathers on the ground. I'm always out there to coil it. I didn't get a
> remote power switch because I WANTED to be out there when the tower went
> up
> or down.
>
> I saw a neat installation at N6EK's place. He had arranged the various
> coax
> cables with a slight twist, and when the tower was lowered, the coax
> coiled
> itself over a low barrel that he had arranged. Very neat. I've never
> seen
> it before or since.
>
> N6TV used a large swimming pool leaf net to collect the coax as it
> descends
> when the tower comes down.
>
> Dick, K6KR
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> --
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.552 / Virus Database: 270.10.6/1891 - Release Date: 1/13/2009
> 8:17 AM
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|