Towertalk
[Top] [All Lists]

Re: [TowerTalk] 1 control box on more than 1 rotor

To: WB4UNA@aol.com, towertalk@contesting.com
Subject: Re: [TowerTalk] 1 control box on more than 1 rotor
From: Doug Renwick <ve5ra@sasktel.net>
Date: Sat, 17 Jan 2009 11:11:45 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Been there, done it, with 2 x 4 pole relays and one +V wire out at a
tower.

Doug

Life is not a spectator sport. 

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of WB4UNA@aol.com
Sent: January 15, 2009 8:02 PM
To: towertalk@contesting.com
Subject: [TowerTalk] 1 control box on more than 1 rotor

I am going to stick a couple more towers in the air and  wondering if
anyone 
has tried or done  the below .
 i would like to operate 2 or more rotors with one control  box. They
will al 
be TX2 style rotors. I just would like to save some on running  all the
rotor 
cable to each tower .
  It is just a idea....
 
Thanks Randy
 
Carlus M. Randy Chavis 
WB4UNA since 1970 
432 tru 160  
EM 93


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>