Kurt has one too...
http://www.k7nv.com/proppitch/id35.htm
I've used Kurt's on his prop pitch rotors and they work great! All
that surface area against the mast makes for an excellent system.
Steve, I would like to see elongated holes to center the clamp for
use of DX Engineering's saddle clamps.
http://www.dxengineering.com/Products.asp?ID=14&SecID=1&DeptID=39
The saddle clamps also give you a larger surface area against the
mast. You could have used half as many clamps if not
more. Unfortunately, those saddle clamps would move the center of
mast away from true center and you now have binding issues. If you
have time to make some minor changes, you have a winner of a product
at a good price.
Dino - KX6D
At 03:59 PM 1/28/2009, K7LXC@aol.com wrote:
>Howdy -
>
> If you're the owner of an M2 Orion 2800 rotator, chances are excellent
>that your antenna system has slipped in the wind at some point. The factory
>mast clamp has 2 fatal flaws: 1) the clamping teeth are not aligned and have
>less than 0.5 square inches of actual clamping surface; and 2) the
>nut and bolt
>surfaces are dimpled which flatten over time so the fasteners loosen up and
>the mast slips again. The Champion Radio Products clamp eliminates both
>problems. They're $160.00 plus s/h.
>http://www.championradio.com/misc.html
>(http://www.championradio.com/misc.html)
>
>Cheers,
>Steve K7LXC
>Champion Radio Products
>Cell: 206-890-4188
>**************From Wall Street to Main Street and everywhere in between, stay
>up-to-date with the latest news. (http://aol.com?ncid=emlcntaolcom00000023)
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>No virus found in this incoming message.
>Checked by AVG - http://www.avg.com
>Version: 8.0.176 / Virus Database: 270.10.15/1924 - Release Date:
>1/29/2009 5:57 PM
Dino - KX6D
dino@kx6d.com
(please note my new e-mail address and update your address books)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|