I have a used g-800sdx and the original connector on the back of the
controller has been changed out and what I looking for is to verify the
pinout from the box to the rotor connector
On the inside of the controller box there GREEN, BLACK, BLUE, BROWN and GRAY
wires. What pins to the rotor connector do they go to
I don't trust the current pinout on the connector but want to the verify
before wiring up
Thanks
73
John
KO4XJ
www.w4nja.org/ko4xj.htm
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|