Shouldn't be difficult at all.
Find the remote switching circuit in the ARRL Handbook for 'over the
coax' switching and you can use +/-/ac/nothing for 4-position switching.
1. normal [probably 2el 40m phased for NE direction
2. reverse [same for SW direction]
3. Antenna A
4. Antenna B
If you need help, let me know, as I build those remote boxes 'on order'.
Don
N8DE
Quoting WW3S <ww3s@zoominternet.net>:
> Looking to phase two multiband verticals, probably Butternut HF6, for 40m,
> using 1/4 wave spacing and either phasing lines or a hybrid. Looking for
> suggestions on how to switch them so I could continue to use either one as a
> multiband vertical or switch to the phased pair for 40m....
>
> 73, Jamie WW3S
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|