Towertalk
[Top] [All Lists]

Re: [TowerTalk] DX Engineering 66-Foot Vertical?

To: <jmaass@k8nd.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] DX Engineering 66-Foot Vertical?
From: "Mike Fatchett" <mike@mallardcove.com>
Date: Fri, 13 Mar 2009 14:13:21 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Here is the webpage for the 65 ft verticals from DXE.  I have had a number
of people ask where I found it.  It is found under vertical antenna parts
Aluminum tubing kits.
 
http://www.dxengineering.com/Products.asp?ID={51E69B40-1957-45C7-98DD-1B5C9D
56B2F0}&SecID=137&DeptID=32



"A slip of the foot you may soon recover, but a slip of the tongue you may
never get over." Ben Franklin
-----Original Message-----
From: Jeff Maass [mailto:jmaass@k8nd.com] 
Sent: Friday, March 13, 2009 5:07 AM
To: mike@mallardcove.com
Subject: [Spam] DX Engineering 66-Foot Vertical?


G'day Mike:

I saw the following from you on the TowerTalk reflector: 

     "I see DX Eng has a 66 ft vertical that
      needs to be guyed and runs about $200
      for the aluminum kit, $160 for the tilt
      base and about $80 for the guying kit."

I cannot find anything like that on the DX Engineering web pages: perhaps I
have a blind spot. Can you help me find it (model number, link, etc.)?

We are looking to possibly add some phased verticals on 80m for the PJ2T
station, as we are not yet "rock crushing" on that band.  


73,

Jeff Maass  K8ND

Station Manager  PJ2T,
  Caribbean Contesting Consortium

CCC Web Site:     http://www.pj2t.org
PJ2T Slide Show:  http://www.k8nd.com/Radio/DELARA_PPT2.pdf
Curacao Critters: http://www.CuracaoCritters.com
 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>