Cqtestk4xs@aol.com wrote:
>
> In a message dated 4/10/2009 9:00:48 PM Greenwich Standard Time,
> cqkg8co@yahoo.com writes:
>
> I am having a little interaction between my TH-11 and my guy wires, so I
> am thinking of replacing a portion of the 1/4 EHS guy wire with some
> Phillystran.
>
> I cannot seem to find information on how to make the connection between
> the EHS and the Phillystran.
>
I use the Big Grips and thimbles for the size Phillystran in use with a
thimble and turnbuckle between the EHS and Phillystran.
73
Roger (K8RI)
> Thank you
>
>
> Brian, KG8CO
>
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> Back when I was in FL I used 502s all the time for that. I also used them
> to connect Polyrod ends to EHS. Some guys have had success using thimble
> over thimble. I had access to some very inexpensive 502s, so I used them.
>
> With the old style Philly that was never a problem. The Philly ends were
> the "bullet" type that had a clevis end, so it was only necessary to hook
> the clevis over the thimble.
>
> 73 Bill KH7XS/K4XS
> **************A Good Credit Score is 700 or Above. See yours in just 2 easy
> steps!
> (http://pr.atwola.com/promoclk/100126575x1220814837x1201410725/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26
> hmpgID%3D62%26bcd%3DAprilfooterNO62)
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|