Former user of dx4win ct
Just got active after 9 years replaced dx4win Ft with dxlab suite n1mm
Dxlab is great just started using n1mm
73 roger n3rc
Sent from my iPhone
On May 12, 2009, at 12:00 PM, towertalk-request@contesting.com wrote:
> Send TowerTalk mailing list submissions to
> towertalk@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/towertalk
> or, via email, send a message with subject or body 'help' to
> towertalk-request@contesting.com
>
> You can reach the person managing the list at
> towertalk-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TowerTalk digest..."
>
>
> Today's Topics:
>
> 1. DX LAB and DX Tool Box (Cal Zethmayr)
> 2. EZ-Way Tower FS (Terry Hahn)
> 3. 60/40 solder (John Hudson)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 12 May 2009 9:15:03 -0400
> From: Cal Zethmayr <w4gmh@cox.net>
> Subject: [TowerTalk] DX LAB and DX Tool Box
> To: towertalk@contesting.com
> Message-ID: <20090512091503.D92A4.263273.imail@eastrmwml47>
> Content-Type: text/plain; charset=utf-8
>
> I'd like to see some comments from anyone that uses either or both
> of these DX programs.
>
> Cal Zethmayr
> W4GMH@COX.NET
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 12 May 2009 06:25:26 -0700
> From: "Terry Hahn" <w7kw.terry@gmail.com>
> Subject: [TowerTalk] EZ-Way Tower FS
> To: <towertalk@contesting.com>
> Message-ID: <F3298D093A364935A02BB6B85C66D91D@w7kwztcbqd2ky4>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I have a 3 section EZ-Way crank-up / tilt-over tower for sale for
> $1500. I am not sure of the exact height but I believe it's approx
> 60-65 feet high. There are 2 electric (110VAC) winches that come
> with it. One winch is for the up-down and the other is used to tilt
> the tower over. The base fixture bolts to a cement base which
> allows the antenna to be lowered to step ladder height for
> servicing. Great for Quads. Everything is here and is in good
> shape. The tower is located in Cave Creek, Arizona, just North of
> the metro Phoenix area. The tower is on the ground ready to travel.
>
> Contact: W7KW -- Terry Hahn, w7kw.terry@gmail.com or via telephone
> at 602-315-0312.
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 12 May 2009 09:41:24 -0500
> From: John Hudson <jd_hudson@comcast.net>
> Subject: [TowerTalk] 60/40 solder
> To: towertalk@contesting.com
> Message-ID: <4A098A94.4010400@comcast.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Will 600-800 watts (AL-811H) melt 60/40 solder?
>
> I made a jumper for my ladder line, LARGE banana plugs on the end
> plugged into a disconnect homebrew box with large jacks. The lugs on
> the
> jacks came un-soldered.. don't know if it was from the power, or from
> moving the ladder line and they broke loose or a bad solder job !
>
> Anyway 60/40 is all I had that day
>
> I'm going to resolder and see what happens
>
> Thanks
>
> John
> KO4XJ
>
>
>
>
> ------------------------------
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> End of TowerTalk Digest, Vol 77, Issue 35
> *****************************************
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|