What is the relevance to U-Bolts or TOWERTALK.
To: AD5VJ Bob <rtnmi@sbcglobal.net>, towertalk@contesting.com, N3XX
<n3xx@charter.net>
Subject: [TowerTalk] Mock disaster video: Los Angles N9FAA Here you go ...
From: "D.G." <indianaj0nes@yahoo.com>
Date: Mon, 18 May 2009 16:44:20 -0700 (PDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Mock disaster video: Los Angles N9FAA
Here you go ...
http://www.youtube.com/watch?v=GYoIb0wk0zE
N9FAA
--- On Mon, 5/18/09, N3XX <n3xx@charter.net> wrote:
From: N3XX <n3xx@charter.net>
Subject: Re: [TowerTalk] U Bolts
To: "AD5VJ Bob" <rtnmi@sbcglobal.net>, towertalk@contesting.com
Date: Monday, May 18, 2009, 5:51 PM
You might try DX Engineering.
http://www.dxengineering.com/sections.asp?DeptID=39&ID=1
73,
Tim - N3XX
----- Original Message -----
From: "AD5VJ Bob" <rtnmi@sbcglobal.net>
To: <towertalk@contesting.com>
Sent: Monday, May 18, 2009 4:59 PM
Subject: [TowerTalk] U Bolts
>I am looking to purchase some hardware including, U Bolts for attaching my
>antenna to the MAST on the Tower and dont know anything
> about Metals or building materials.
>
> Texas Towers doesn't seem to have them on their site.
>
> I want a U Bolt that will handle a 2" MAST, but what other specifications
> do I look for and where do I buy one that is high quality
> not some import that is going to fail after a couple of months.
>
> Bob AD5GJ
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|