Towertalk
[Top] [All Lists]

Re: [TowerTalk] FW: Good Quality Pulleys

To: <relizondo@ionoscom.com>
Subject: Re: [TowerTalk] FW: Good Quality Pulleys
From: "Blake Bowers" <bbowers@mozarks.com>
Date: Tue, 9 Jun 2009 21:56:30 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
No offense, but I just looked at the rescuetech harness,
and had no doubt that it was just a rescue style harness,
and certainly not something I would have MY employees
use.

This is what my guys use,

http://www.midwestunlimited.com/detail.lasso?cat_master=1002&cat_level=1022&product_id=10656

While it does cost a bit more, we never, NEVER scrimp
on safety.

We have to maintain our own confined space rescue
gear, tripods, air handlers, SCBA, high angle rescue,
fall arrest gear, gas detectors and more.  Its a small
cost to go with the best.  (we have a number of
underground facilities as well as towers)

Don't take your organs to heaven,
heaven knows we need them down here!
Be an organ donor, sign your donor card today.



----- Original Message ----- 
From: "Richard Elizondo" <relizondo@ionoscom.com>
To: <TOWERTALK@contesting.com>
Sent: Tuesday, June 09, 2009 9:12 PM
Subject: [TowerTalk] FW: Good Quality Pulleys


> I basically got told I was an idiot and then the harness was fine. In 
> their
> words, it is rescue gear and not made for prolonged or everyday use.
>
> My company will never do business with them again.
>

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>