Towertalk
[Top] [All Lists]

Re: [TowerTalk] RG11 Cable

To: Jim Brown <jim@audiosystemsgroup.com>
Subject: Re: [TowerTalk] RG11 Cable
From: Pete Smith N4ZR <n4zr@contesting.com>
Reply-to: n4zr@contesting.com
Date: Tue, 25 Aug 2009 17:15:45 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
For about 12 years I used CATV hardline, cut to a multiple of a half 
wave at 1750 KHz, measured at 28 MHz.  It worked beautifully.

73, Pete N4ZR
New Articles Daily - the Contesting Compendium at http://wiki.contesting.com
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net


On 8/25/2009 3:07 PM, Jim Brown wrote:
> On Tue, 25 Aug 2009 14:59:27 -0400, Tom Haavisto wrote:
>
>    
>> http://www.k1ttt.net/technote/matching.html
>>      
>
>    
>> Shows how to match 50 to 75 ohm cable
>>      
>
> Not only is this complicated and frequency sensitive (it only covers
> a single band), it is un-necessary.
>
> 73,
>
> Jim K9YC
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>    
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>