Towertalk
[Top] [All Lists]

[TowerTalk] Fwd: Solder quality question

To: towertalk@contesting.com
Subject: [TowerTalk] Fwd: Solder quality question
From: hanslg@aol.com
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Tue, 12 Jan 2010 13:50:08 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
 You have a 50% tin, 50% lead solder with flux included. Generally used for 
soldering of electronics. You will have the "usual" degradation from corrosion 
if you don't protect the connector from moist.

Hans - N2JFS

 


 

 

-----Original Message-----
From: anthony <k2vi@cox.net>
To: TowerTalk@contesting.com
Sent: Mon, Jan 11, 2010 11:23 am
Subject: [TowerTalk] Solder quality question


Hello to all on TT. I have a roll of old solder. the label states made in 
england. Alloy Sn 50 ersin muliticore 5 core solder. non-corrosive flux. Can 
this be used for soldering connectors without that nasty degrigation. Im just 
not sure if it contains lead which is bad. Any help?

tony k2vi
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>