Towertalk
[Top] [All Lists]

Re: [TowerTalk] FT1000MP

To: "'Tower and HF antenna construction topics.'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] FT1000MP
From: "Bill Axelrod" <bill@axelrods.org>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Wed, 13 Jan 2010 12:58:54 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have used a FT-1000 MP MK V with separate receive antennas (beverages) on
the receive only jack for about six years with no problems.

73...   Bill ND9E 

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of jcowens1@comcast.net
Sent: Wednesday, January 13, 2010 12:51 PM
To: Towertalk
Subject: [TowerTalk] FT1000MP



Would like to get in touch with anyone who did own or does own a FT1000MP
and has used the separate receive antenna jack for a receive only antenna
while using the A or B antenna jacks for the transmit antenna. The manual
does not say if it blanks the receive antenna input when transmitting. This
could cause a problem with RF coming into the receive jack when transmitting
on A or B on the same band. Anyone operating Top Band and using separate Rx
and Tx antennas would likely have done this. 



John Owens  -  N7TK 






_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>